8.Adjust the back shell J so it is centered between the back canes K.

9.Tighten the eight screws L securing the angle adjustable brackets I to the back shell.

L

J

K

K

4 FIXED DUAL MOUNT

4.8Adjusting the Back Height

1.Loosen the compression bar hardware A.

￿ WARNING

DO NOT adjust the center screw in the clamp body. The center screw B is designed only to hold the compression bar in place during installation. Adjusting this screw may prevent the compression bar from tightening properly onto the back cane.

2.Adjust the back to the desired height.

Heightcanes. adjustments must be made equally on both back

3.Tighten the compression bar hardware to secure the clamp bodies C in place.

When re-tightening the compression bar hardware, alternate back and forth between the screws until the compression bar is fully secured.

C

BA

Part No. 1171914

19

Invacare® Matrx® MX1

Page 19
Image 19
Invacare IMX1 user manual Loosen the compression bar hardware a, Adjust the back to the desired height