Invacare IMX1 - page 30

7 MAINTENANCE

Invacare® Matrx® MX1 30 Part No. 1171914

1. Wipe the outer cover with a damp cloth when necessary.

1. Release the hook and loop fasteners securing the back cushion

cover. The hook and loop fasteners are located on the top and

bottom edge and inside of the back shell.

2. Remove the foam cushion.

3. Remove the lumbar support. Refer to Installing/Adjusting the

Lumbar Support on page28.

4. Remove the cover from the back shell.

5. Follow the washing instructions on the cover.

6. Allow the cover to fully dry.

7. Insert the foam cushion into the cover.

8. Ensure the foam cushion is fully inserted and the perimeter of the

foam is aligned with the cover seams.

9. Install the cover onto the back shell.

10. Install the lumbar support. Refer to Installing/Adjusting the Lumbar

Support on page28.

Visually inspect parts including hardware, brackets, upholstery materials,

foams (if accessible), and plastics, for deformation, corrosion, breakage,

wear or compression.

WARNING

Check ALL fasteners weekly to ensure that mechanical

connections and attaching hardware are tightened

securely - otherwise injury or damage may occur.

DO NOT continue to use this product if problems are

discovered. Corrective maintenance can be performed at

or arranged through your equipment supplier.

WARNING: Risk of Injury

Always have a dealer inspect the product for damage

before transferring the product to a different user. If

any damage is found, DO NOT use the product.

Otherwise injury may occur.