4 FIXED DUAL MOUNT
4.9Adjusting the Back Angle and Back Depth
1.Loosen the screws A on the side of both clamp bodies B.
2.Adjust the angle adjustable brackets C in the clamp bodies to achieve the desired back angle and back depth.
Angle and depth adjustments must be made equally on both sides.
3.Tighten the screws on both clamp bodies to secure the back into position.
CB
A
4.10 After Installation
1.Verify that all mounting hardware is fully tightened.
2.Ensure that the back is securely attached to the wheelchair.
Invacare® Matrx® MX1 | 20 | Part No. 1171914 |
