Invacare IMX1 user manual Loosening the Compression Bar

5 QUICK RELEASE DUAL MOUNT

5.4Installing the Adjustable Mounting Brackets onto the Back Shell

1.Remove any existing wheelchair back, back upholstery or back cane hardware.

2.Remove the four hex screws A and washers (not shown) securing the two backing plates B to the adjustable mounting bracket C.

3.Align the adjustable mounting bracket with the slots D on one side of the back shell E.

The adjustable mounting bracket should be oriented with the four slots F against the back shell.

4.Place the four washers onto the hex screws.

5.Loosely attach the adjustable mounting bracket to the back shell using the two backing plates, four hex screws and four washers. Do not tighten the hex screws at this time.

6.Repeat STEPS 2-5 for the other bracket.

5.5Loosening the Compression Bar

1.Loosen the two screws A securing the compression bar B to the clamp body C.

Loosening the compression bar allows the clamp body to sit flush against the back cane D prior to installation (Detail A).

DETAIL A C B D

B

D A

A

F

C D B

E

Invacare® Matrx® MX1 22 Part No. 1171914