Fixed Dual Mount, Our customer service department | Invacare IMX1

4 FIXED DUAL MOUNT

4 Fixed Dual Mount

4.1Installation Overview

If any of the hardware is missing or misplaced, please contact our customer service department and arrangements will be made to send you the necessary replacements.

Invacare

USA: 800-333-6900

Canada: 800-668-5324

Motion Concepts Canada: 866-748-7943 USA: 888-433-6818

Included Items

•Back Shell with Foam and Cover

•Angle Adjustable Brackets

•Band Clamp Assemblies

4.2Tools Required

•Tape measure/ruler

•4mm hex key (provided)

4.3 Before Installation

	WARNING
	Before beginning the installation process, please fully
	read through the instructions to understand the steps
	and adjustments involved. If you have any questions or
	concerns during the installation process, please contact
	our customer service department.
Part No. 1171914		15	Invacare® Matrx® MX1

Image 15

Invacare IMX1 user manual Fixed Dual Mount, Our customer service department

Contents

Model IMX1 Invacare Matrx MX1 Invacare Matrx MX1 Contents Invacare Matrx MX1 SymbolsGeneral Overview Important Information Outer Cover Limited Warranty North America Intended Use SafetyInstallation Information General Guidelines Operating Information Weight Limitation and Model NumbersWARNING Included Items Installation OverviewBefore Installation Mono Mount Inch 23 cm Tall MX1 Back Cushions Only Installing the Mounting Hardware Band clamp in place Carefully slide the rigidizer bracket onto the band clamp Installing the Tracking Plate on the Back Shell Adjusting the Back Height Installing the Back Shell onto the Mounting Hardware Adjusting the Back Angle Removing the Mono Mount Hardware Fixed Dual Mount Our customer service department Repeat Steps 1-3 for the opposite side Clamp Body Adjustment Installing the Back Installing the Band Clamps Fixed Dual Mount Loosen the compression bar hardware a Adjust the back to the desired height Adjusting the Back Angle and Back Depth After InstallationLoosen the screws a on the side of both clamp bodies B Quick Release Dual Mount Loosening the Compression Bar Securing the Clamp Body to the Band Clamp Securing the Clamp Body Assembly to the Back Cane Inside View Adjusting the Back Height Removing the Back Cushion Mounting holes B on the back shell C Installing/Adjusting the Lumbar Support Plug InsertsOptions Adhesive Pads Width Installing the Optional Privacy Flap Inspection MaintenanceCleaning General Cleaning Laundering Usability Survey USA TRD0283