5.9Installing the Back
The instructions in this section apply to both sets of mounting hardware.
The right side is pictured in the figures in this procedure.
The mounting pin assembly A is secured to the slots B of the clamp body C.
A B | INSIDE VIEW |
C
1.Loosen the four mounting screws securing the adjustable mounting bracket D to the back pan E.
2.Adjust the width of the adjustable mounting bracket so that it aligns with the mounting pin assembly on the clamp body.
3.Lift the lever F on the adjustable mounting bracket to unlock it.
4.Insert the upper and lower pins G into the notches H in the adjustable mounting bracket.
5 QUICK RELEASE DUAL MOUNT
E |
| G | |
A | 3 | ||
| |||
H |
|
| |
2 |
|
| |
|
| 4 | |
D | F G |
|
HC
5.Push down on the back pan to ensure the mounting pins are properly seated inside the notched recess of the adjustable mounting bracket.
6.Press the lever down to lock the back pan into place.
Part No. 1171914 | 25 | Invacare® Matrx® MX1 |
