LED Error Codes
The main power LED located on the top of the Ethernet Adapter will flash red in repeating patterns to indicate the following errors:
1 blink: Could not initialize Ethernet interface
2 blinks: Memory check failed
3 blinks: Software error
4 blinks: Failed to initialize the radio
5 blinks: Memory full
6 blinks: Ethernet interface error
7 blinks: Miscellaneous error
If you see any of the above flashing sequences, first attempt to reset the Ethernet Adapter. If the flashing sequence persists after you have reset the unit, make a note of which of the above pat- terns you have and call Proxim Technical Support.
52
