3 MONO MOUNT
4. | Position the rigidizer bracket B at a 45° angle to the band clamp. |
5. | Align the edges of the clamp with the corresponding slots F in the |
| rigidizer bracket. |
OPTIONAL INVERTED POSITION
FOR 9” (23 CM) TALL BACKS
6. | Carefully slide the rigidizer bracket onto the band clamp. |
7. | Ensure the clamp is fully engaged in the slots in the rigidizer bracket. |
8. | Insert the two locking pins G into the rigidizer bracket to hold the |
| band clamp in place. |
9. | Ensure the pins are fully inserted into the rigidizer bracket. |
D E 
3
F
| The pins should slide into position with little effort. If the |
pins are difficult to insert, verify that the band clamp is | |
| properly centered and fully seated inside the slots of the |
| rigidizer bracket. |
B | STANDARD |
INSTALLATION |
| 4 | |
5 |
| |
D | 8 | |
E 3 F | ||
G |
B
G
Invacare® Matrx® MX1 | 10 | Part No. 1171914 |
