Runco SC-60D, SC-50D operation manual Adjusting the Projection, Angle

Installation

Adjusting the Projection ➤	If the screen is significantly higher or lower than the projector, you can also tilt the
Angle	projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling
	mount.
	For a floor installation, turn the adjustable feet at the bottom of the projector to adjust the
	projection angle.
	The projector can be rotated (front-to-back) up to 360 degrees and mounted without it
	affecting performance. However, to ensure optimal performance of the lamp, limit the
	side-to-side tilt of the projector to ±20 degrees; see Figure 3-8.

± 360º

± 20º

Figure 3-8. Mounting Angle Ranges (Front-to-Back and Side-to-Side)

If you do this, you may need to vertically shift the image to compensate. For detailed instructions, refer to Primary Lens Adjustments: Focus, Zoom and Position on page 41.

28 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual