Runco SC-50D, SC-60D operation manual Installation, Remote Control, Notes on Batteries

Installation

3. Installation

Note	Installation must be performed by a qualified custom video
	installation specialist.

To install batteries in the remote control:

1.Press down the tab on the cover and pull the cover in the direction of the

arrow.

2. Insert the included batteries. Ensure that the polarities correctly match the and markings inside the battery compartment.

3. Insert the lower tab of the cover into the opening, and press down the cover until it clicks in place.

•Make sure that the battery polarities are correct when installing the batteries.

•Do not mix an old battery with a new one or different types of batteries.

•If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.

•Do not expose batteries to excessive heat such as from sunshine, fire or the like.

3.1

Remote Control

Notes on Batteries

Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual 15