Runco SC-60D, SC-50D operation manual Dhd

Installation

RS-232 Connection: Connect the Display Control output from the DHD Controller to the RS-232input on the SC-50d/SC-60d. Use a standard, modular telephone cable with RJ11 plugs at both ends. On the SC-50d/SC-60d end, use the provided RJ11-to-DB9 adapter. This adapter is wired as shown in Figure 3-10.

		RCV DATA	2
	4
To/From		XMT DATA
	3		3
DHD				To/From Projector
Controller	2	SIG GND	5
	1, 6	NO CONNECTION	1, 4, 6,	RS232 IN
			7, 8, 9
					A
	6-position			PWR
			DB9 Male

RJ11 Male

6

1

1

6

Figure 3-10. RS-232 Connection from the DHD Controller to the SC-50d/SC-60d

30 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual