Runco SC-60D, SC-50D operation manual SC-50d/SC-60d Input Panel

Controls and Functions

2.2 SC-50d/SC-60d Input Panel

1.RIGHT (INTAKE) SIDE PANEL

The right side panel is perforated to allow cool air to enter the projector.

2.LEFT (EXHAUST) SIDE PANEL

The left side panel is perforated to allow warm air to exit the projector. Removing this panel provides access to the lamp.

3.INPUT PANEL COVER

Removing this panel provides access to the projector input panel. For more information, refer to SC-50d/SC-60d Input Panel on page 6.

4.REAR EXHAUST VENT

Warm air exits the projector through this vent. Ensure that it is not obstructed in any way.

5.ADJUSTABLE FEET (4)

Located on the underside of the projector are four adjustable feet. Raise or lower these feet when positioning the projector to ensure it is level on all sides so the displayed image will appear rectangular without any keystone.

6.PROJECTION LENS

Figure 2-2shows the SC-50d/SC-60d rear input panel.

1 2 3 4

RS232 IN

PWR

Analog

1 - Dual Link DVI-I Digital	2 - VGA	Signal
	2 - VGA	Signal

5

6

7

Figure 2-2. SC-50d/SC-60d Input Panel

6 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual