Runco SC-50D, SC-60D operation manual Sleep Timer

Operation

You should save changes to any of the following settings to a preset; otherwise they will be lost when a new input source or resolution is selected:

•Brightness

•Contrast

•Color saturation

•Tint

•Sharpness

•Gamma

•Lamp Settings

•Color temperature and white balance

To select a memory preset, press or to highlight it and press ENTER.

To save the settings for the current input and display mode to the Custom 1 or Custom 2 memory preset, select it, press or to highlight Save and press ENTER.

To save the settings for the current input and display mode to the

Note ISF Night or ISF Day memory preset, select Save ISF Night or Save ISF Day from the Calibration menu (refer to Save ISF Night/Save ISF Day on page 68).

To reset the Custom 1 or Custom 2 memory preset to its factory-default state, select it, press or to highlight Reset and press ENTER.

Select Sleep Timer from the Main Menu to turn off the SC-50d/SC-60d after a specified interval. Press or to select Off, 30 Minutes, 60 Minutes, 90 Minutes, 2 Hours or 4 Hours. Then, press ENTER.

Sleep Timer

Sleep Timer

ÎOff

30 Minutes

60 Minutes

90 Minutes

2 Hours

4 Hours

Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual 63