Runco SC-50D External Control, Opcode, Value, Supported? √ = Yes, – = No, Initiator, Follower

External Control

Table 6-3. CEC Commands Supported by the DHD Controller (continued)

Opcode	Value	Supported? (√ = Yes, – = No)
		Initiator	Follower
Give Physical Address	0x83	–	√
Set Stream Path	0x86	–	√
Get CEC Version	0x9F	–	√
Abort Message	0xFF	–	√
User Control Pressed	0x44	–	√
User Control Released	0x45	–	√
Give OSD Name	0x46	–	√
Menu Request	0x8D	–	√
Give Device Power Status	0x8F	–	√

Note	The DHD Controller does not transmit HDMI CEC control
	messages from the “HDMI Audio Out” connector.

Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual 95