Psion Teklogix 32M/64M, netBook manual Docking Station, Docking connector

Docking Station

The docking station allows faster and more convenient connection of the mains adapter and docking cable.

1.Connect your mains adapter to the socket marked DC at the rear of the docking station.

2.Plug the mains adapter into your power outlet and switch on.

3.Connect the small connector of your docking cable to the socket marked RS232 at the rear of the docking station. Connect the other end to the COM (RS232) port of your PC.

Now, each time you return to your desk, you can place your netBook onto the docking station to start charging the battery and connect to your PC. (Start PsiWin as described in the PsiWin section of this Guide).

To remove the netBook from the docking station, press the eject pad in the centre to lift it clear of the connector.

For additional information, refer to \extras\support\netBook\hardware.pdf on the CD.

Docking connector

Push here to disengage the netBook

Connect the RS232 cable and mains adapter plug

Expanding 192