Psion Teklogix 32M/64M, netBook manual PC Card, Press

PC Card

The PC card interface accepts type I and type II cards. Type I PC cards are used for storage of files and additional applications. Type II PC cards can be used for additional hardware - modems for instance.

The PC card slot is located on the right hand side below the pen holder. If no card is fitted to the slot, a ‘blank’ is fitted to stop the ingress of foreign objects. Before plugging a device into the PC card interface, you must first eject the ‘blank’ card.

To do this, hinge the PC card eject button out from the case until pointing straight out and push it in. The card will then be ejected.

Withdraw this completely and insert your new device. The card should be inserted face up and pushed in until flush with the casing. The PC card eject button should be folded away to prevent accidental removal.

If the device is a Memory Card, it will be added as a new drive and can be accessed in the System screen. If the new card is a device such as a modem, the type needs to be set in the Modems entry of the Control Panel.

For additional information, refer to: \extras\support\netBook\hardware.pdf on the CD.

Hinge out	Press
the PC Card	button to
eject button	eject card

Expanding 190