Psion Teklogix netBook, 32M/64M manual Printing, Setting up the printer

PRINTING

You can print from most of the programs on the netBook, including Data, Agenda, Word, Contacts, Sheet, Sketch and Program.

To print, you need one of the following:

∙A printer which is IrDA Infrared compatible, if you wish to print files using Infrared.

∙PsiWin installed on your PC, if you wish to print files via a PC.

∙A Parallel Printer Link to connect to a parallel printer.

∙The Docking cable and a Serial Printer Converter to connect to a serial printer.

Before you start printing, you need to specify:

∙the method by which you are going to print.

∙the “printer driver” for the printer you wish to use.

Printing 173

Setting up the printer

You can select the “standard” printer you normally use to print out files on the netBook from the System screen. The printer you select in the System screen is used for all programs unless you select a different printer from within a program, to use for that program only.

∙To select the standard printer: tap the Control panel button on the Toolbar, or select the Control panel command from the Tools menu. Select the Printer icon, and select the printer model.

∙To select a different printer to use for an individual program: open the program for which you want to change from the standard printer. Select the Print setup command from the Printing commands on the File menu, and press the Printer button to change the printer model and/or port.