Psion Teklogix netBook, 32M/64M manual Dialling phone numbers

Dialling 185

Dialling phone numbers

To dial a number already entered in the Contacts program, or in a Data or Agenda file:

1.Highlight the entry you want to dial from.

2.Press the Fn and Menu keys together, or tap the Dial button on the Toolbar in Contacts. The netBook will find up to five numbers in each entry.

3.Select the number you want to dial, and hold the netBook loudspeaker near to the telephone mouthpiece, approximately 2 inches (5 cm) away.

∙Press the Dial button to dial the number.

∙If you wish to use the dial out code, press the Dial out button to dial the number preceded by the dial out code.

∙You can change the number if it is not correct.

∙If you need to dial additional digits, press the Free input button to make the netBook dial the DTMF codes as you type each number.

To dial using free input dialling: press the Ctrl key with the Fn and Menu keys, then dial the number in the ‘Free input’ dialog. You can use the digits 0...9, *, and #. Press the Redial button to redial the number if necessary.

Note: The preset tone and delay times will normally be fine for dialling, unless you are using a poor quality telephone line. If dialling doesn’t work in a particular location, try increasing the value of the ‘Tone time’ and ‘Delay time’. Tone, Delay and Pause times are measured in units of 1/32 seconds.