Installation Instructions

PST 2000 Series

PST INSTALLATION

Perform the following procedures to mount the PST.

Select Mounting Location

To select the mounting location, do the following:

WARNING: It is the responsibility of the installer to verify that the wall to which the mount is anchored will safely support the combined load of all attached components and equipment.

1.Determine the exact mounting location to install the wall mount prior to installation, keeping in mind the screen size.

NOTE: Mount the PST on dual wall studs or some other equivalent supporting framework that is vertical or horizontal.

2.Using a stud sensor, locate the two wood studs where you will mount the PST. Refer to Figure 3 for dual wood studs that are 16” or 24” apart on center.

3.Using a nail as a temporary hook, hang the mount on the wall using the triangular hole located in the center of the mount (see Figure 2).

4.Use a pencil to mark the mounting holes where the four pilot holes will be drilled into the center of the wood stud. Make sure the mounting holes are square and straight. Remove the mount from the wall, placing it on the floor or a table.

5.Drill the pilot holes using a 7/32” drill bit.

Flag Extender Installation (OPTIONAL)

To install the optional flag extenders, perform the following (Refer to Figure 4):

1.Insert extender (20) slot into top of latching flag.

2.Install screw (30) through latching flag and extender (20) into nut (40).

3.Repeat for opposite side.

Hang the mount on the wall temporarily using a nail in the center hole. Level the mount before drilling pilot holes.

Figure 2. Use Triangular Hole to Hang the Mount

Wood Studs

16” or 24”

Wall

Pilot Holes

 

Pilot Holes

Figure 3. Wood Studs 16” or 24”Apart on Center

Figure 4. Optional Flag Extenders

4

Page 3 Page 5
Page 4
Image 4
Chief Manufacturing PST 2000 Series PST Installation, Select Mounting Location, Flag Extender Installation Optional
Page 3 Page 5

PST 2000 Series specifications

The Chief Manufacturing PST 2000 Series represents a cutting-edge solution in the realm of audiovisual mounting technology. Designed for a seamless blend of functionality, aesthetic appeal, and ease of use, this product line caters to a diverse range of applications, from corporate settings to educational institutions.

One of the standout features of the PST 2000 Series is its advanced mounting capability, which supports a wide array of display sizes and formats. This flexibility is critical in modern environments where screen configurations can vary significantly. The PST 2000 Series is engineered to accommodate both flat and curved displays, ensuring that users can enjoy a consistent viewing experience regardless of the display architecture.

Built with durability in mind, the PST 2000 Series utilizes high-quality materials that ensure longevity and stability. The robust construction guarantees that even the largest of screens are mounted securely, minimizing the risks associated with display falls or irregular movement. Additionally, each mount undergoes rigorous testing to certify its strength and reliability, making it suitable for high-traffic and demanding environments.

The series also incorporates user-friendly installation technologies, such as the innovative ClickConnect system. This feature allows for quick and intuitive attachment of displays to the mount, significantly reducing installation time and effort. Adjustable settings make it possible to achieve optimal screen positioning with minimal hassle, further enhancing usability.

Enhanced cable management is another hallmark of the PST 2000 Series. With integrated solutions that hide unsightly wires and cables, the mounts contribute to a clean and professional appearance in any setting. This focus on aesthetics is complemented by various finish options that allow users to match the mount with their interior design.

In terms of adjustability, the PST 2000 Series shines with features that support tilt, pan, and rotation. This adjustment capability ensures that users can find the perfect angle for viewing, reducing glare and improving visual comfort. As a result, the PST 2000 Series enhances the overall viewing experience for audiences and enhances engagement during presentations.

In conclusion, the Chief Manufacturing PST 2000 Series is a versatile, reliable, and aesthetically pleasing mounting solution that caters to the evolving needs of audiovisual environments. With its combination of durability, ease of installation, and enhanced adjustability, the PST 2000 Series stands as a testament to Chief’s commitment to quality and innovation in the realm of display mounting solutions.
Top Page Image Contents