I N S T A L L A T I O N I N S T R U C T I O N S
LARGE FLAT PANEL DISPLAY STATIC MOUNT
PST 2000 Series
The PST static wall mount accommodates large flat screens weighing up to 200 lbs (90.72kg). The teardrop holes in the mount allow for quick connect/disconnect of the screen, thus simplifying installation and maintenance processes.
The top and bottom mounting brackets are adaptable to supporting framework with wood studs that are 16” on center or 24”on center.
The mount has integrated lateral shift, allowing for four different mounting options. For dual wood studs 16” on center, the lateral shift is + 4.5 inches. For dual wood studs 24” on center, the lateral shift is + 0.5 inches.
After installing the flat screen on the mount, the screen can be locked in place using the convenient locking flag. A padlock can be used on the latching flag for added security.
The mount is concealed behind the display, making it a low profile wall mount.
!IMPORTANT: If the installation of this product requires OSHPD seismic approval, refer to OSHPD
available at www.chiefmfg.com, and located on the | PST 2000 Series |
product information page for the mount. |
BEFORE YOU BEGIN
CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten- tion to the “Important Warnings and Cautions” on Page 2.
The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the mount must be capable of supporting five times the total weight of the equipment.
The maximum weight to be installed on the PST mount is 200 lbs (90.72kg).
Chief Manufacturing, a division of Milestone AV Technologies | ||
8401 Eagle Creek Parkway, Savage, MN 55378 | ©2008 Milestone AV Technologies | |
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918 | 10/08 | |
|
|
|
|
|
|
