Siemens 810T manual Alarm numbers and groups/delete alarms, NC alarms

4 Monitoring Functions 09.91

4.4 Alarm numbers and groups/delete alarms

4.4Alarm numbers and groups/delete alarms

The alarms are divided into 7 alarm groups (5 NC and 2 PLC alarm groups)

NC alarms:	·	POWER ON alarms
	·	RS232C (V.24) alarms
	· RESET alarms/axis-specific
	· RESET alarms/general
	·	ERASE alarms

PLC alarms: · PLC error messages

·PLC operational messages

Alarm number

Alarm group

Alarm cleared by ...

1		....	15	POWER ON alarms	Switching on
40		....99, 132* 2)			the control
16		...	39	RS232C	1. Calling the softkey menu
					including the ºDATA IN-
				(V.24) alarms
					OUTº function1)
					2. Operating ºDATA IN-
					OUTº softkey
					3. Operating ºSTOPº
					softkey
100	*	....196 2)		RESET alarms/axis-specific	Operating the
			*		RESET key
1320, 1321, 1322, 1323,				RESET alarms/axis-specific	Switching on
	1324				the control
2000		.... 2999		RESET alarms/general	Operating the
					RESET key
3000		.... 3201		ERASE alarms	Operating the
					acknowledge key
6000		.... 6163		PLC fault messages	Operating the
					acknowledge key
7000		.... 7023		PLC operator messages	The messages are reset
					automatically by the PLC

Tabular overview with assignment of alarm no. and clear function

_______

1)Explanatory notes:

The ºDATA IN-OUTºfunction can be called in the following operating modes:

AUTOMATIC	/ JOG / REFPOINT / INC1 ........ INC10 000 / PRESET
2 ) The asterisk º	* º stands for : º0º = axis 1, º1º = axis 2, º2º = axis 3, º3º = axis 4, º4º = axis 5.

4-4	© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
	SINUMERIK 810T, GA3 (BN)