Siemens 810T manual 8 ºIncrementalº mode ºINC Feed 1 ... INC Feed 10 000º

3 Operating Sequences 01.93

3.2.7 ºJOGº mode

You can select ºRapid traverseº by operating the ºRapid overrideº key, simultaneously with the direction keys.

20

10

6

2

60

40 70

80

90

100

110

0120

F %

You can modify the rapid traverse rate, using the feedrate override switch.

The º0%º setting generally causes feed and rapid traverse to stop.

The rapid traverse feedrate is defined in machine data.

The feedrate can also be effective for rapid traversing

in the range 0% to 100%.

The spindle speed, and T, H, and M functions can be changed using ºOVERSTOREº (3.2.3.2).

3.2.8ºIncrementalº mode (ºINC FEED 1 ... INC FEED 10 000º)

In this mode, operation is NC-controlled in ºJOG/manualº mode, not in a program; with each operation of the direction key, you traverse the axis concerned in the selected direction by the set increment. The increment values are settable as follows:

1, 10, 100, 1000, 10000 increments

The weighting of the increments depends on the display resolution. However, the smallest possible traversing distance is defined by the input resolution.

The feedrate, the input resolution and the display

resolution are defined in the machine data.

3-122 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)