Siemens 810T manual Operating Sequences Traverse to reference point

11.90

+X +Q

± Z +Z

± Q ± X

Note:

3 Operating Sequences

3.1.2 Traverse to reference point

Operate the direction keys on the integrated (or external) machine control panel. You can now traverse the individual axes one after the other to the reference point.

The selected traverse direction is checked by the control before starting.

If you have operated the incorrect direction key (e. g.	+X	instead of	±X
no traverse motion will result as the operation is rejected.

,

With the ºFeed Holdº key you can stop the selected axis before the reference point is reached.

(( 810T))

(( Bild 6 von Druckerei einmontieren

After reaching the reference points the position values referring to the machine zero point are displayed as ºACTUAL POSITIONº on the CRT. The control is now synchronized with the machine.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-3

SINUMERIK 810T, GA3 (BN)