09.91

2 Operation

2.1.1 SINUMERIK 810T operator interface with integrated machine control panel

Key for the selection of operating modes

You use this key when you want to select operating modes or further softkey functions.

The menu selected is shown on the bottom two lines of the CRT display (menu for softkey functions see Section 2.1.1.1).

Operate the

key

until you see the menu for the following operating modes displayed:

PRESET MDI- AUTOM.

JOG

REPOS

AUTO-

MATIC

Section of the CRT display with menu of the operating modes

Operate the

key a second time

A menu of further softkey functions is displayed.

The menu displayed depends on the current operating mode, which is shown on the first line of the display (see Section 2.1.1.1).

For detailed information see Sections 2.3.3 to 2.3.6 and 2.4 !

You can extend the displayed operating mode menu:

Operate the ETC key

below the CRT

The extension of the operating mode menu is shown :

INC 1

INC 10

INC 100

INC

1 000

INC

10 000

Section of the CRT display:

1st extension of the operating mode menu

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

2-21

SINUMERIK 810T, GA3 (BN)

Page 36 Page 38
Page 37
Image 37
Siemens 810T manual Key for the selection of operating modes, Operate Key a second time, Operate the ETC key
Page 36 Page 38
Top Page Image Contents