Siemens manual Automatic calculation of the zero offset, Bild 810T/21 einmontieren, Inc

3 Operating Sequences 09.91

3.1.5 Zero offset

3.1.5.3 Automatic calculation of the zero offset

This function requires a workpiece gauging device.

The coordinates of the measuring points of the workpiece gauging device (referred to the machine) should be entered as ºReference planeº point.

To calculate the zero offset, the tip of the turning tool must be coordinated with the measuring point.

Sequence of operation

INC...

or

AUTOM.

ZO

Using one of the softkeys select either the ºJOGº or ºINC 1...10 000º operating modes.

Now coordinate a tip of the workpiece with a measuring point.

Extend the softkey menu displayed using the key to the right below the display.

Now operate the ºAUTOMATIC ZERO OFFSETº softkey.

This input screen form appears with the input field marked in inverse video.

((Bild 810T/21 einmontieren))

5

J

4

I

Now enter the zero offset number (here º54º) in the ºG 54 ... G 57º range and terminate your entry using the input key.

3-22 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)