Siemens 810T manual Interfacing to the Machine, Ordering data Options, B03 + B75 +

01.93 7 Interfacing to the Machine

7.1 General

7 Interfacing to the Machine

7.1General

The operating of the SINUMERIK 810T depends on the setting of the machine data, and the Options.

In the basic version of the SINUMERIK 810T (Order no. 6FC3 251-1AC), the standard machine data are set in the works.

It can be modified when interfacing to the machine and when the control is equipped with Options.

These Sections 7.2 and 7.3 contain tables showing:

·possible Order Options which influence the operation.

·all of the standard machine data which can be modified by machine tool manufacturer, and influence the operation.

The tables have extra columns for entering the configuration of the control as delivered.

7.2Ordering data - Options

The Order No. for the basic version of the SINUMERIK 810T control is 6FC3 251 - 1AC

If the control is equipped with options, the Order No. is extended.

It then has the following format:

e. g. 6FC3 251 - 1AC -	Z
B03 + B75 +..
two Order Codes
		indicates that Order Code(s)
		follow(s)

Tick the boxes in the ºOption supplied with control?º column for the following table if

the Order No. 6FC3 251-1AC-Z is followed by the order code listed.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 7-1

SINUMERIK 810T, GA3 (BN)