Siemens 810T manual Operating Sequences 11.90 Program

3 Operating Sequences 11.90

3.1.10 Program

Sequence of operation

You wish, for example, to enter block ºN5 G90 G00 X25 LFº into program no. º%12º:

and

Select one of the following operating modes:

·PRESET ( Actual value setting )

·JOG ( Feed/jog )

·AUTOMATIC ( Automatic operation )

·INC 1 ... INC 10 000 ( Incremental jog )

·REFPOINT ( Traverse to reference point )

To do so, you use the operating mode selection key, and then the corresponding softkey (see above) or the operating mode selector switch (external machine control panel).

PART

PROGRAM

Now operate the ºPART PROGRAMº softkey.

Please note:

Apart from program input, the PART PROGRAM function also serves for

±Program editing (see Section 3.1.12)

±Program management (see Section 3.1.13)

±Program simulation (see Section 3.1.14).

3-46	© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
	SINUMERIK 810T, GA3 (BN)