Siemens manual Sinumerik 810T, GA3 BN

4 Monitoring Functions	09.91
4.6 Listing of the alarms/alarm description

Alarm No.	32
AlarmText:	ºData format error R232C (V.24)º
Reason:	± The permissible number of decades after an address is not correct
	±	The decimal point occurs in the wrong place
	±	The part programs or subroutines are not defined or completed
		correctly (check heading!)
	±	The NC is waiting for an º=º character, which is not defined in EIA
		code.
Effect:	± Data transfer is interrupted
	±	The last block is not stored
Remedy:	Check the data to be read in.
Alarm No.	33
Alarm Text:	ºDifferent programs same no. R232C (V.24)º
Reason:	The stored program and the program being read in, have the same
	program number, but are not identical.
	With block transfer: Program read in not identical with selected
	program.
Effect:	No data are stored
Remedy:	Either delete or ºRENAMEº the old program
	With block transfer: Enter correct program number in Automatic basic
	display.
Explanation:	If a new program is read in which has the same program number as
	one already stored, both programs are compared and alarm 33 is
	displayed.
	With block transfer: The received program number is compared with
	the program number specified in the Automatic basic display. If the
	program numbers differ from each other Alarm 33 is triggered.
Alarm No.	34
Alarm Text:	ºOperator error R232C (V.24)º
Reason:	Data transfer was started on the NC, but the PLC gave a second Start
	signal.
Effect:	No data are read in
Remedy:	Stop data input, and restart
Alarm No.	35
Alarm Text:	ºReader error R232C (V.24)º
Reason:	Error message from Siemens tape reader
Effect:	± Data transfer is interrupted
	±	The last block is not stored
Remedy:	±	Restart data transfer
	± If the fault reoccurs, call Service

4-10 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)