Siemens 810T manual 184, 196, 2000, 2030

4 Monitoring Functions	01.93
4.6 Listing of the alarms/alarm description

Alarm No.	184*
Alarm Text:	ºStop behind ref. pointº
Reason:	When traversing to reference point, the axis was stopped between the
	reference cam and the zero mark of the measuring system
Effect:	± Inhibiting of NC START
	±	Reference point not reached
Remedy:	Approach reference point again
Alarm No.	196*
Alarm Text:	ºFollow-up /park for axisº
Reason:	Spindle is not active as rotary axis.
Remedy:	Switch spindle to axis mode.
Alarm No.	2000
Alarm Text:	ºEmergency Stopº
Reason:	The EMERGENCY STOP signal is output from the PLC to the NC
Effect:	± Inhibiting of NC START
	±	Operation is brought to a defined stop
	±	Servo enable is removed
	±	Follow up operation
Remedy:	Check to see if the EMERGENCY STOP cam was traversed to, or if
	the EMERGENCY STOP switch was operated
Alarm No.	2030
Alarm Text:	ºWrong path incrementº
Effect:	± Locking of NC START
	± Locking of NC Ready
	±	Machining stop
Remedy:	Check G06 block, recalculate and correct if necessary.
Explanation:	Distance-to-go contains an incorrect value which does not match the
	programmed contour

_______

º*º stands for : º0º = axis 1, º1º = axis 2, º2º = axis 3, º3º = axis 4, º4º = axis 5

4-14	© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
	SINUMERIK 810T, GA3 (BN)