Siemens 810T manual 3028, 3029, 3030, 3032, 3033, 3034, 3040, 3041

4 Monitoring Functions	11.90
4.6 Listing of the alarms/alarm description

Alarm No.	3028
Alarm Text:	ºToo many fields/variablesº
Remarks:	Alarm only on commissioning
Alarm No.	3029
Alarm Text:	ºGraphics option not availableº
Reason:	Graphic elements have been projected into the selected display, but
	the ºGraphicsº option is not fitted in the control
Remedy:	±	Retrofit ºGraphicsº option
	±	Only project display without graphic elements
Explanation:	Only with additional programming developed in WS 800
Alarm-No.	3030
Alarm Text:	ºCursor memory not availableº
Reason:	The cursor memory programmed for the display selected is not correct
	(number not allowed or too large).
Remedy:	Use the workstation to redefine the cursor memory
Explanation:	± The function of the cursor memory is to position the cursor where it
		was previously when the display is called again.
	±	Only with additional programming via WS 800
Alarm-No.	3032
Alarm Text:	ºToo many fields / variablesº
Remarks:	Alarm only on commissioning
Alarm-No.	3033
Alarm Text:	ºDisplay text not availableº
Reason:	An error has occurred while linking with the workstation.
Remedy:	Check link list, and relink with the workstation (to clear link error).
Explanation:	± Only with additional programming via WS 800
	±	Alarm only on commissioning
Alarm-No.	3034
Alarm Text:	ºText not availableº
Explanation:	± Only with additional programming via WS 800
	±	Alarm only on commissioning
Alarm-No.	3040
Alarm Text:	ºFields / var. not displayableº
Explanation:	± Only with additional programming via WS 800
	±	Alarm only on commissioning
Alarm-No.	3041
Alarm Text:	ºToo many fields / variablesº
Remarks:	Alarm only on commissioning

4-30 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)