Siemens 810T manual Operating Sequences 3.1.4 Tool offset 09.91

3Operating Sequences 3.1.4 Tool offset

or

5

J

09.91

You select the desired tool offset number, in the range D1 ...

D99, by operating either the ºPage forwardº or ºPage backwardsº key.

or

you call the desired tool offset number D ... (º5º, in this example). The letter D need not be entered.

Now press the Search key.

Now operate any of the cursor keys to position the cursor at the desired input field (Identifiers 1 .. 9).

1

F

5

J

3

L

Then enter your desired offset value (º153º in this example) with the numeric keys.

You can see the entered value on the input line of the display.

Now operate the yellow input key, and store the offset value in the offset memory.

The value you input is now displayed in the selected input field.

·The inverse video marking of the input field now automatical- ly jumps to the next position (next identifier P ..) of the selected offset number D ... .

·After storing all the offset values of the selected offset number D..., the inverse video marking of the input field now jumps to the first offset value of the following offset number.

3-8 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)