Siemens manual Influencing the program, Bild 810T/43 einmontieren, Skip Block YES-NO, Yes

3 Operating Sequences 09.91

3.2.3 Influencing ºAUTOMATICº operation

3.2.3.1 Influencing the program

With the operation of the softkeys described here, the active program is influenced.

Sequence of operation

PROGRAM

CONTROL

Operate the ºPROGRAM CONTROLº softkey in the ºAUTOMATICº or ºMDI AUTOMATICºoperating mode.

This CRT display with a menu of 5 functions appears.

((Bild 810T/43 einmontieren))

By operating any of the 5 softkeys, you can now change over the preset ºNOº to º YESº. A function marked with ºYESº is active.

SKIP BLOCK

YES-NO

You select, for example, the ºSKIP BLOCKº softkey function .

Display: Skip block YES

Blocks in the program which are marked with an oblique before the block number (º/ N ...º) are skipped.

3-94 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)