Siemens 810T manual Correction display ºCORRECTION BLOCKº, Part Corr Program Block, Value

11.90 3 Operating Sequences

3.1.12Program correction (ºEDITº): Insert /modify/delete word, insert/delete block

3.1.12.1Correction display (ºCORRECTION BLOCKº)

When processing or simulating (see Section 3.1.14) a program, the program processing is stopped and the relevant alarm displayed when the control recognizes a programming error. Using the ºCORRECTION BLOCKº function the block or the word to be corrected will be marked.

Sequence of operation

PART CORR.

PROGRAM BLOCK

Operate the ºPART PROGRAMº softkey, and then subsequently the ºCORRECTION BLOCKº softkey, in any of the operating modes:

PRESET / JOG / AUTOMATIC / INC 1 .... INC 10 000 / REFPOINT.

The cursor is now positioned in front of the block/word recognized as containing an error

7	...
X

	Using the keyboard, now correct the relevant address
	(address ºXº in the example) and enter the appropriate
· · ·	value,
	subsequently operate the ºModify wordº key.

After the correction operate the ªProgram startº key to continue program progressing.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02	3-57
SINUMERIK 810T, GA3 (BN)