Siemens 810T manual Setting data ºR PARAMETERSº, Store Axis

09.91 3 Operating Sequences

3.1.5 Zero offset

Input of a tool offset number D... is irrelevant for automatic tool offset. You can perform an automatic tool offset separately as described in Section 3.1.4.4.

...

STORE

Z AXIS

...

· · ·

Enter the coordinate ascertained with the gauging device for the ºZ axis reference planeº, and store it using the ºSTORE Z AXISº softkey.

If required you can store the measured X coordinate in the same way.

The zero offset is now automatically calculated by the control for the selected axes and stored in the memory.

3.1.6Setting data: ºR PARAMETERSº, ºSPINDLEº, ºAXIALº, ºANGLE OF ROTATIONº, ºSCALE MODIFICATIONº

Using the setting data, you determine certain operating states.

You can input, modify or delete setting data using screen forms.

Setting data ºR PARAMETERSº

The 810T control recognizes parameters R 0 ... to R 699 and R 700 ... to R 999.

·Parameters R O...R 699 are channel-specific, i.e. they exist for all channels, ºCH1º to ºCH3º, separately.

·Parameters R 700...R 999 are jointly valid for all channels (central parameters).

Only certain R parameters are available for the user.

The following overview shows the parameter assignment.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-23

SINUMERIK 810T, GA3 (BN)