Siemens 810T manual 2153, 2154, 2155, 2160, 2161, 2171, 2172, 2173, 2183

4 Monitoring Functions	01.93
4.6 Listing of the alarms/alarm description

Alarm No.	2153
Alarm Text:	ºControl loop spindle HWº
Reason:	As for alarm 132*
Effect:	± Inhibiting of NC START
	±	Operation is brought to a defined standstill
Remedy:	As for alarm 132*
Alarm No.	2154
Alarm Text:	ºSpindle measuring system dirtyº
Reason:	On measuring systems with a contamination signal, the measuring
	system has signalled a fault to the NC
Effect:	Inhibiting of NC START
Remedy:	Check the measuring system
Alarm No.	2155
Alarm Text:	ºOption M19 not availableº
Reason:	ºM19 S ...º has been programmed, although this function is not
	present
Effect:	Inhibiting of NC START
Remedy:	±	Correct program
	±	Retrofit option ºM19º
Alarm No.	2160
Alarm Text:	ºScale factor not allowedº
Remedy:	Modify scale factor
Alarm No.	2161
Alarm Text:	ºScale change not allowedº
Remedy:	Correct scale modification
Alarm No.	2171
Alarm Text:	ºApproach not possibleº
Remedy:	Correct approach block
Alarm No.	2172
Alarm Text:	ºRetract not possibleº
Remedy:	Correct retraction block
Alarm No.	2173
Alarm Text:	ºWrong approach/retract planeº
Remedy:	Correct approach/retraction plane
Alarm-Nr.	2183
Alarm-Text:	ºAxis is not a rotary axisº
Reason:	The axis must be declared a rotary axis in MD 564*, bit 5.
Effect:	NC Start and NC READY 2 disabled.
Remedy:	Set MD 564*, bit 5=1.
4-22		© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)