Siemens 810T manual Store Axis

3 Operating Sequences 09.91

3.1.4 Tool offset

Position the cursor on the input field for the tool offset number D with the cursor keys.

5

J

Using the numerical keys, now enter the desired tool offset number D... of the tool to be measured (º5º in this example), and terminate your entry with the input key.

...

STORE

X AXIS

...

· · ·

Enter the coordinate ascertained with the gauging device for the ºX-axis reference planeº, and store it using the ºSTORE X AXISº softkey.

Now store the ªZ-axis reference planeº in the same way.

The tool offset for the selected axis is automatically calculated and stored in the tool offset memory.

3-12 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)