Siemens 810T manual Data type Meaning

01.93	3 Operating Sequences
	3.1.15 Data input/data

Data type	Meaning
MPF	Part program (Main Program File)
SPF	Subroutine (Sub Program File)
TOA	Tool offset (Tool Offset Active)
ZOA	Zero offset (Zero Offset Active)
TEA 1	NC machine data (TEsting Data Active 1)
TEA 2	PLC machine data (TEsting Data Active 2)
PCA	PLC alarm text (Programmable Control Alarms)
PCP	PLC program (Programmable Control Program)
RPA	R parameters with assigned values (R Parameter Active)
SEA	Addresses with assigned values (SEtting Data Active)
CLF	Clear instruction (CLear File)
UMS	User Memory Submodule

Under Interface Assignment: the control gives you the identifier of the connected device type for Interface 1 and Interface 2. (For identification of various device types see Section 6.3)

STOP

Using the ºSTOPº softkey, you can interrupt data input at any time.

DATA-IN

START

You continue data input again.

During data input it is not possible for the control to call up specific data!

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-81

SINUMERIK 810T, GA3 (BN)