Siemens 810T manual 3042, 3043, 3046, 3048, 3049, 3050, 3063

09.91	4 Monitoring Functions
4.6	Listing of the alarms/alarm description

Alarm No.	3042
Alarm Text:	ºDisplay description errorº	{serious error}
Reason:	An error has been found in the display description which cannot be
	exactly defined; e. g. a non-existent field has been programmed.
Remedy:	Check the display with the workstation
Explanation:	Only with additional programming via WS 800
Alarm No.	3043
Alarm Text:	ºDisplay description errorº	{non serious error}
Reason:	As for alarm 3042
Remedy:	As for alarm 3042
Explanation:	As for alarm 3042
Alarm No.	3046
Alarm Text:	ºVariable errorº
Reason:	A variable has been selected that cannot be displayed in the control.
Remedy:	Check display with workstation
Explanation:	Only with additional programming via WS800
Alarm No.	3048
Alarm Text:	ºWrong workpiece definitionº
Reason:	Minimum and maximum workpiece definition values have been
	interchanged.
Remedy:	Check the workpiece definition for valid values
Alarm No.	3049
Alarm Text:	ºWrong simulation area!º
Reason:	Incorrect or no values given for the definition of the simulation area
Remedy:	± Check the values for the simulation area (all planes)
	± A new start of simulation is possible after RESET and operation of
	the ºACKNOWLEDGE ALARMº key
Alarm No.	3050
Alarm Text:	ºIncorrect inputº
Reason:	Incorrect/undefined simulation data
Alarm No.	3063
Alarm Text:	ºData block not availableº
Explanation:	A DB No. was selected in PLC STATUS which is not available.
Remedy:	Select or create the correct data block.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 4-31

SINUMERIK 810T, GA3 (BN)