2 Operation

2.3.2 Operating modes - overview

·Feed / Jog (CRT display: JOG)

With the direction keys and the preset feedrate value ºFº, you can traverse the tool at random.

After a program interruption, you can see the distance to the point of interruption displayed in the ºREPOS offsetº.

You traverse to the point of interruption until the REPOS offset shows zero

11.90

(( 810T))

(( Bild 2 von Druckerei einmontieren))

ºJOGº basic display

·Manual data input / Automatic (CRT display: MDI AUTOMATIC)

In this operating mode, you can input part

 

program blocks into the buffer memory of

 

the control.

 

The control processes the input block,

(( 810T))

and then clears the buffer memory ready

for new data.

(( Bild 5 von Druckerei

 

einmontieren))

Used, for example, in connection with operations in ºJOGº or ºINC FEEDº modes.

ºMDI AUTOMATICº basic display

· Traverse to reference point (CRT display: REFPOINT)

When the direction keys are used, the machine moves in either jog or con- tinuous operation, depending on the machine data set.

The reference point must be approached in each axis individually.

When the reference point has been reached, the position register is set to the value of the reference point coordinates.

(( 810T))

(( Bild 6 von Druckerei einmontieren))

ºREFPOINTº basic display

2-36

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

 

SINUMERIK 810T, GA3 (BN)

Page 55
Image 55
Siemens manual Bild 5 von Druckerei, 810T Bild 6 von Druckerei einmontieren