Siemens 810T manual Preliminary remarks, Traverse to reference point Tools

2.4.8	ºREPOSº mode	. . . . . . . . . . . . .	2-60
2.4.9	ªGUIDINGº (operator prompting) function	. . . . . . . . . . . . . . . . .	2-61
2.5	Glossary of softkey functions		2-64
3	Operating Sequences	. . . . . . . . . . . . . .	3-1
3.0	Preliminary remarks		3-1
3.1	Preparation	. . . . . . . . . . . . .	3-2
3.1.1	Switching on	. . . . . . . . . . . . .	3-2
3.1.2	Traverse to reference point		3-2
3.1.3	Tools		3-4
3.1.4	Tool offset	. . . . . . . . . . . . .	3-4
3.1.4.1	Input of tool offset		3-4
3.1.4.2	Deleting/modifying an individual offset value . . . .	. . . . . . . . . . . . . . . .	3-9
3.1.4.3	Deleting all offset values in an offset number D ...	. . . . . . . . . . . . . . . .	3-10
3.1.4.4	Automatic tool offset		3-11
3.1.4.5	Integrated tool management		3-13
3.1.4.6	Input of tool data		3-13
3.1.4.7	Display of tool data		3-15
3.1.5	Zero offset	. . . . . . . . . . . . .	3-17
3.1.5.1	Settable zero offsets		3-18
3.1.5.2	Programmable zero offset - external zero offset . .	. . . . . . . . . . . . . . . .	3-20
3.1.5.3	Automatic calculation of the zero offset		3-22

3.1.6Setting data: ºR PARAMETERSº, ºSPINDLEº, ºAXIALº,

	ºANGLE OF ROTATIONº, ºSCALE MODIFICATIONº	3-23
3.1.7	Flexible plane selection	3-33
3.1.8	Axis synchronization	3-35
3.1.8.1	Function of the modes with ªaxis synchronizationº	3-35
3.1.9	TRANSMIT coordinate transformation	3-37
3.1.9.1	Behaviour of the transformation in the modes	3-37
3.1.9.2	TRANSMIT function in the various modes	3-39

3.1.9.3Monitoring the software limit switch for fictitious axes

	with the TRANSMIT function	3-41
3.1.10	Program input	3-42
3.1.10.1	Program input with the keyboard	3-42
3.1.10.2	Program input with operator guiding	3-45
3.1.11	Contour	3-50

3.1.12Program correction (ºEDITº):

	Insert/modify/delete word, insert/delete block	3-54
3.1.12.1	Correction display (ºCORRECTION BLOCKº)	3-57
3.1.13	Program management	3-58
3.1.13.1	Displaying the stored programs (ºDIRECTORYº)	3-58
3.1.13.2	Protection of subroutines (cycle lock)	3-59
3.1.13.3	Cycle lock release (ºENABLEº)	3-60
3.1.13.4	Copying a program (ºCOPYº)	3-61
3.1.13.5	Moving a program (ºMOVEº)	3-62
3.1.13.6	Renaming a program (ºRENAMEº)	3-63
3.1.13.7	Deleting a program (ºDELETEº)	3-64
3.1.13.8	Reorganizing the program memory (ºREORGº)	3-65
3.1.13.9	ºSelecting a programº	3-66
3.1.13.10	Operator guidance macros (OGM) and back translation	3-67
3.1.14	ºSIMULATIONº	3-72
3.1.14.1	Simulation ºAREA OF THE WORKPIECEº	3-72
3.1.14.2	Influencing simulation	3-74
3.1.15	Data input/data output	3-77