Siemens 810T manual ºSPINDLEº setting data, Standard Maximum Input, Unit, Oriented spindle stop

09.91 3 Operating Sequences

3.1.6 Setting data: ºR PARAMETERSº, ºSPINDLEº, ºAXIALº, ºANGLE OF ROTATIONº, ºSCALE MODIFICAT.º

or

3 3

L L

... ...

· · ·

You can call up further screen forms with input fields for other R parameters with the page up/down keys ...

or

... you can call up an input screen form or a particular R parameter using the alphanumeric keys and the search key (º33º in example, ºRº need not be entered).

Enter the value for the selected R parameter with the numerical keys.

Subsequently, you can transfer the value into the input field with the input key.

ºSPINDLEº setting data

Using an input screen form, you can enter/modify the following spindle data via ºSETTING

	Standard	Maximum	Input
Designation	setting data	input	unit
	(delivery	value
	state)	1)	2)
Smoothing constant with threading	0	5	-
Progammed spindle speed limitation	0	16000	rev / min
Oriented spindle stop	0	359.9	1 / 10 degree
Spindle speed limitation (absolute)	0	16000	rev / min

1) The ºMaximum input valueº is fixed in MD.

2) The ºInput unitº is fixed in MD:

you can also use 0.1 rev/min instead of rev/min.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-27

SINUMERIK 810T, GA3 (BN)