Siemens 810T manual Foto Nr T/47 einmontieren, Number º ... º for the search destination, 102

3 Operating Sequences

3.2.3 Influencing ºAUTOMATICº operation

((Foto - Nr. 810T/47 einmontieren))

01.93

This screen form appears with the input field marked in inverse video.

% or

...

3

L

...

· · ·

Input ª%º for the main program or ªLº for the subroutine and then press the input key. The inverse marking jumps to the next field for the program number.

Using the numerical keyboard enter the pro- gram number º ... º, and store it with the input key.

...

START

		Using the numerical keyboard enter the block
...
		number º ... º for the search destination, and
	· · ·	store it with the input key.
		Operate the ºSTARTº softkey.

The axis positions programmed in the current block are

approached with linear interpolation. Caution: danger of collision!!

Using the ºProgram startº key, activate program processing.

After ºBLOCK SEARCHº, you can traverse the difference between the actual position and the calculated command position, by selecting the axis and using the jog keys, in ºREPOSº operating mode.

Block search in the L95/96 cycles: if comment texts are in the contour program without block numbers, the control outputs the alarm 3000 ªGeneral programming errorº.

3-102 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)