Siemens 810T manual ºSCALE MODIFICATIONº setting data, Scale Modif

3 Operating Sequences 09.91

3.1.6 Setting data: ºR PARAMETERSº, ºSPINDLEº, ºAXIALº, ºANGLE OF ROTATIONº, ºSCALE MODIFICAT.º

...

· · ·

Enter the value for the selected angle of rotation with the numeric keys.

Subsequently, you can transfer the value into the input field with the input key.

ºSCALE MODIFICATIONº setting data

Sequence of operation for ºSCALE MODIFICATIONº setting data

SETTING

DATA

Operate the ºSETTING DATAº softkey in any operating mode.

Extend the softkey menu displayed using the ETC key to the right below the display.

SCALE

MODIF.

Operate the ºSCALE MODIFICATIONº softkey.

The ºSETTING DATA SCALE MODIFICATIONº input screen form appears in ºAUTOMATICº mode.

The following values defaulted by the program appear:

·The ªscale factorº (magnification or reduction) for:

± Channel 1 : P ...	(e. g.	º2º	signifies 2 x magnification;
		º0.5º	signifies reduction by half)

±Channel 3 : P ...

·The ªscale centreº (reference point) :

±	Axis 1 :	X ...
±	Axis 2 :	Z ...
	.	.
	.	.

3-32 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)