What to Do Next
X8 Timing Marker Source Setting
When you change the X8 timing marker source setting, the traffic generator settings are cleared. The analyzer does this because it has to re- calculate and
∙allow for the X8 marker when you enable X8 marker generation
∙allocate all available bandwidth to transmit traffic when you disable X8 marker generation
Fill Cell Filter Setting
This setting allows you to specify that the analyzer generates idle or unassigned cells to fill unused bandwidth. When this option is disabled, unused bandwidth is handled at the physical line level by the transmit drivers.
What to Do Next
The interface pod is now ready for use.
See the Online Help to find out the different tasks you can perform using the analyzer and interface pod.
12
