To Set Up the Interface Pod
To Manually Configure the Interface Pod
1From the Configure menu, select the appropriate port; then select Set Up.
2Click the ATM25 tab.
3Select the parameters you require.
4 Click to set the configuration
or
Click Auto to set the parameters to the default settings. A message warns you that the reconfiguration will cause some measurements and data to be lost and asks if you want to continue. Click OK.
∙Note See the UNI Signaling Test Application’s Help for information on configuring the 25.6 Mb/s interface pod from the
When the configuration is complete, the analyzer updates all relevant screens and windows to reflect the new configuration parameters.
11
