HP Broadband Service Analyzer manual Declaration of Conformity

DECLARATION OF CONFORMITY

According to ISO/IEC Guide 22 and EN 45014

Manufacturer’s Name	Hewlett-Packard Australia Ltd
Manufacturer’s Address	Communications Measurements Division Australia
	347 Burwood Highway
	Burwood East 3151
	Victoria, Australia
declares that the product:
Product Name	25.6 Mb/s Interface Pod
Model Numbers	HP E5129A
Product Options	This declaration covers all options of the above product.
conforms to the following product specifications:
Safety	EN 61010-1: 1993/IEC 1010-1: 1990 + A1
EMC	EN 55011:1991/CISPR 11:1990 (Group 1, Class A1)
	EN 50082-1:1992
	IEC 801-2:1991 2	4 kV CD, 8 kV AD
	IEC 801-3:1984	3 V/m
	IEC 801-4:1988	0.5 kV Signal Lines, 1 kV Power Lines
Supplementary Information	This product herewith complies with the requirements of the Low Voltage
	Directive 73/23/EEC and the EMC Directive 89/336/EEC.
	1The product meets the listed specifications when installed in an HP

E5200A with interface pods installed in both ports.

2Bit error performance will be reduced under these conditions.

Melbourne, Australia, July 1996 Issue 1 Graeme Cobb - Quality Manager

European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department ZQ/ Standards Europe, Herrenberger Straße 130, D-71034 Böblingen, Germany (FAX +49-7031-14-3143).