Copyright

© Hewlett-Packard Australia Ltd 1997

 

 

 

 

All rights reserved.

 

 

 

Notice

 

The information contained in this document is subject to change without notice.

 

 

TO THE EXTENT ALLOWED BY LOCAL LAW, HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND

 

 

WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

 

 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

 

 

To the extent allowed by local law, Hewlett-Packard shall not be liable for errors contained herein or for

 

 

incidental or consequential damages in connection with the furnishing, performance, or use of this

 

 

material.

 

 

 

Warranty

 

A copy of the specific warranty terms applicable to your product and replacement parts can be obtained

 

 

from your local Sales and Service Office.

 

 

Printing history

 

New editions of this guide are issued to reflect extensive changes made to the application. Revisions may

 

 

be issued between application versions to correct errors in the manual. There may not be a new edition

 

 

issued in conjunction with every application version release. The application version at the date of

 

 

printing is noted in the following table.

 

 

 

 

Manual Name:

Setting Up the 25.6 Mb/s Interface Pod

 

 

Manual Part Number:

E5129-90001

 

 

 

 

Product Model Number: HP E5129A

 

 

 

 

Edition

Printing Date

Application Version

 

 

1

October 1997

A.02.0

 

Visit the Broadband Service Analyzer web site at http://www.hp.com/go/atmanalyzer

Product support

Hewlett-Packard Australia Ltd

 

Communications Measurements Division Australia

 

PO Box 221

 

Blackburn, 3130

 

Victoria, Australia

We want to hear from you. If you have any comments, questions, or suggestions about our documentation or support, send them to:

Email: cmd-a_support@aus.hp.com

Fax: +61 3 9210 5570

Phone: +61 3 9272 8633

Printed in Australia