Siemens 810T Key leads to the following functions, Input of setting data for scale modification

2 Operation 09.91

2.5 Glossary of softkey functions

PROGRAM CONTROL

(INFLUENCING THE PROGRAM)

The key leads to the following functions:

±SKIP BLOCK

±DRY RUN FEEDRATE

±PROGRAMMED STOP

±RAPID OVERRIDE

±DECODING SINGLE BLOCK

±DRF HANDWHEEL ENABLE

±DRF

PROGRAM END

You select the functions of the ºM02º (end of program) group via softkeys.

PROG. HANDL.

(PROGRAM HANDLING)

You can copy, move, rename and delete the program in the program memory. You can reorganize the program memory (after deleting programs) (see ºREORGº).

RENAME

You can change the program number.

The program itself remains unchanged.

REORG

(REORGANIZE)

You can reorganize the program memory.

The space that has been made available by the deletion of programs can be used again for entering further programs.

R PARAMETER

You input the R parameters as setting data.

±After ºDATA OUTº, you can select the output of R parameters with the ºR PARAMETERº softkey.

RESET

Simulation is interrupted and returned to the reset state.

ROTAT. ANGLE

(ANGLE OF ROTATION)

Input of setting data for coordinate system rotation.

SCALE MODIF.

(SCALE MODIFICATION)

Input of setting data for scale modification.

2-70 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)