Siemens 810T manual Sequence of operation calling machine data bits, Machine Bits

7 Interfacing to the Machine 01.93

7.3.3 Machine data bits

Sequence of operation: calling machine data bits

Sequence of operation as in the Section 7.3.1 for calling ºGeneral machine dataº, up to

operating the ºNC MACHINE DATAº softkey, and then ...

MACHINE

BITS

... operate the ºMACHINE DATA BITSº softkey.

The ºMachine data bitsº display appears.

...

...

· · ·

Using the keyboard, now enter the number of the desired machine data and operate the search key.

The machine data searched for and the bit pattern stored in the control are displayed marked in inverse video.

	You can also use the cursor keys
	or
	the ºPage Up/Downº keys call further machine data.
or

Please consult the machine tool manufacturer©s documentation for the

setting and significance of the individual machine data bits.

7-8 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)