Siemens manual 810T Bild 3 von Druckerei einmontieren, 810T Bild 13 von Druckerei einmontieren

09.91 2 Operation

2.3.5Branching to operating functions within an operating mode

2.3.5.2Example for the selection of further operating functions within the same menu

The menu on the CRT can display max. 5 functions.

To call further operating functions in the control in the same menu,

you use the ETC key:

Example:

(( 810T))

(( Bild 3 von Druckerei einmontieren

Basic CRT display in ºAUTOMATICº mode. First menu of 5 functions.

Operate the ETC key on the right, below the CRT.

(( 810T))

(( Bild 13 von Druckerei einmontieren

Basic CRT display in ºAUTOMATICº mode. Menu extension with 5 functions.

2.3.5.3 Menu display from the NC program or from the PLC

The control allows you to display any menu from the system or user area at any time. This is done either via a new interface (DB 40) in the PLC program or a new softkey function (SK 56). The machine tool manufacturer defines which menus can be displayed when.

For further details see the relevant User©s Guide of the machine tool manufacturer.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-45

SINUMERIK 810T, GA3 (BN)